NetC@p connection

[ F8 ] > [ Open Configuration ] > [ Connection Details ]

Auswahl Hilfen Inhaltsverzeichnis previous top next english version

Operator MenuOpen ConfigurationConnection detailsNetC@p connection

 

In case of a NetC@p connection, the "Connection Details" menu will have the following layout:

 

Connection details

 

All other buttons have the following functions:

 

Input field

Edit field for the alias name of the current address book entry.

Use this edit field to specify the alias name of the current address book entry. This alias name is displayed in the header range of the "Quick Access" menu, above the IP address.

For a clear identification of the communication partner we recommend you choose one that bears some relation to the communication partner.

You may use all alphanumerical characters of the English keyboard layout for this alias name except these special characters: < > | \ / : * ?

Because this field is mandatory, at least one valid character must be entered.

If you leave this field empty or use one or more invalid characters, a message will pop up pointing this out.

Before you can continue, this field must have a valid entry.

Input field

Edit field for current IP address of the NetC@p server.

Use this edit field to enter the currently used IP address of the connected NetC@p server.

Port number

It is also possible to add the associated port number to the server IP address.

Example:

192.168.1.23:5900

The port specified here must be the same as that specified in the RDP configuration.

 

Hinweis

The target address of the Host PC must be in the same network as that of the Thin Client or must be accessible from there !

Input field

Edit field for the access password.

Use this edit field to specify a password.

Input field

Option fields for the type

of station activation.

OptnBtn_Menu

The station is activated via a button in the "Quick Access" menu.

OptnBtn_AnyInpEvent

The station is activated by any input event on the keyboard or the touch screen.

NetCap_ActRequestTimeField

Input field for the request failure interval.

Use this field to specify the time that may pass until a missing confirmation of a sending request is signaled as a connection failure.

Touch button

Touch button for

Advanced settings

This function is currently not supported and can therefore not be activated.

Display field

Display field for current connection type.

This field shows the current connection type for the selected address book entry.

DlgBtn_ConTypeSelect

Touch button for the selection of connection type.

Use these touch buttons to select a connection type for the selected address book entry. The following connection types are available: KVM box, VNC, RDP and NetC@p.

Each time you tap on one of these buttons, the connection type changes in a rolling cycle from KVM box to VNC to RDP and NetC@p. This change is shown in the connection type display field. The layout / settings (middle part of the "Connection Details" menu) also changes according to which connection has been selected.

Touch button or Touch button or Touch button

Touch button for testing whether the connection to the NetC@p server is available.

If the connection type has been changed and confirmed by clicking on "Apply", you can use this touch button for testing whether the connection to the RDP server is available.

It is therefore possible to test this connection and the settings for all users directly from the "Connection Details" menu. This requires a physical connection to the communications partner.

Touch button

Touch button for returning to advanced settings

Tap on this touch button to return to the main menu of the cicon2 Advanced settings.

 

 

<< return