Installation of the factory software

Auswahl Hilfen Inhaltsverzeichnis previous top next english version

General InformationInstallation of the Factory Software

 

If you need to re-install the factory software, proceed as follows:

 

In safe area:

 

Switch off the device.
If required, open the back cover.
Stick the USB stick with the factory software into the cicon2 X4 USB socket or into the socket of the VB-USB-... cable.
Switch on the device.
The factory software will now be installed automatically.

 

In hazardous area:

 

Switch off the device.
Stick the intrinsically safe USB stick with the factory software into the socket of the VB-USB-PlugVB-USB-Plug cable which is located on the outside of the device.
Switch on the device.
The factory software will now be installed automatically.

 

 

Once the installation has been completed, switch the device back off.

 

Hinweis

Please remove the USB stick before re-starting the device, since otherwise the device would expect an installation of the factory software when being re-booted.

 

 

<< return