Settings

Go to the "Settings" register of the "Gauge" dialogue to define the basic values of the scale.

Display range
Starting angle	Specifies the angle from which the scale should be drawn.	0° determines the position in the bottom / centre radius. With the maximum angle of 360° the scale ends again at the bottom centre.
End angle	Specifies the angle to which the scale should be drawn.
Unit
Definition	Input field for the unit description
Position	Specifies the position of the unit description.	bottom = the unit description is displayed below the pointer centre. top = the unit description is displayed bove the pointer centre.
Pointer
Pointer colour	Selection field for the pointer colour. Click on the field to open the colour selection dialogue.
Display minimum value	Activates the trailing pointer for the minimum value.	Tick the box to activate the display of the trailing pointer.
Display maximum value.	Activates the trailing pointer for the maximum value.
Min. / Max. colour	Selection field for the trailing pointer colour. Click on the field to open the colour selection dialogue.
Length in %	Specifies the pointer length for the current value.	100% equals the virtual object radius.