Keyboard field

Station parameter ► Falcon series ► Keyboard field

The keyboard area provides you with information on the keys which have been actuated. The indicated address starts with the offset +00 and is called start address A key or information is clearly assigned to each bit following the start address.

Dlg_FlcnStationParametersKeybrdField

Start address + 00	Key / function	Used for / as	Notes
Bit 00	Cursor up	System operation / key	Bit of the Cursor up key is set.
Bit 01	Cursor down	System operation / key	Bit of the Cursor down key is set.
Bit 02	Cursor left	System operation / key	Bit of the Cursor left key is set.
Bit 03	Cursor right	System operation / key	Bit of the Cursor right key is set.
Bit 04	Del. and/or Escape	System operation / key	Bit of the Escape (Clear) key is set.
Bit 05	Enter	System operation / key	Bit of the Return key is set. If a reader is connected to the operator interface, this bit with bit no. 11 is also set during a valid reading process. *
Bit 06
Bit 07
Bit 08	Feedback slave A	only with: Modbus redundancy	Bit 8 is set (feedback) when slave A is communicating.
Bit 09	Feedback slave B	only with: Modbus redundancy	Bit 9 is set (feedback) when slave B is communicating.
Bit 10	Live bit	Reader system function	Only for Mifare reader !
Bit 11	Input via reader	Reader system function	During a valid reading process of a connected reader this bit is set with bit no. 5. *
Bit 12	Info	System operation / key	Bit of the Information key is set.
Bit 13	Trigger bit	System function	At each keystroke, the trigger bit is set in addition.
Bit 14	Histogram full	System function	This bit is set when the histogram memory is full of messages. (ring buffer)
Bit 15	Pass bit	System function	The pass bit is set by the operator interface and can be used to monitor communication.

	Keys				applies to
Start address	+ 01	+02	+03	+04	MT/ET-65	ET75	MT/ET-125
Bit 00	F 01	Shift + F 01	Alt - F 01	Ctrl - F 01	+	+	+
Bit 01	F 02	Shift - F 02	Alt - F 02	Ctrl - F 02	+	+	+
Bit 02	F 03	Shift - F 03	Alt - F 03	Ctrl - F 03	+	+	+
Bit 03	F 04	Shift - F 04	Alt - F 04	Ctrl - F 04	+	+	+
Bit 04	F 05	Shift - F 05	Alt - F 05	Ctrl - F 05	+	+	+
Bit 05	F 06	Shift - F 06	Alt - F 06	Ctrl - F 06	+	+	+
Bit 06	F 07	Shift - F 07	Alt - F 07	Ctrl - F 07	+	+	+
Bit 07	F 08	Shift - F 08	Alt - F 08	Ctrl - F 08	+	+	+
Bit 08	F 09	Shift - F 09	Alt - F 09	Ctrl - F 09	+	-	+
Bit 09	F 10	Shift - F 10	Alt - F 10	Ctrl - F 10	+	-	+
Bit 10	F 11	Shift - F 11	Alt - F 11	Ctrl - F 11	+	-	+
Bit 11	F 12	Shift - F 12	Alt - F 12	Ctrl - F 12	+	-	+
Bit 12	F 13	Shift - F 13	Alt - F 13	Ctrl - F 13	+	-	+
Bit 13	F 14	Shift - F 14	Alt - F 14	Ctrl - F 14	+	-	+
Bit 14	F 15	Shift - F 15	Alt - F 15	Ctrl - F 15	+	-	+
Bit 15	F 16	Shift - F 16	Alt - F 16	Ctrl - F 16	+	-	+

		applies to
Start address + 05	Key	MT/ET-65	ET75	MT/ET-125
Bit 00	Soft key 1	+	-	+
Bit 01	Soft key 2	+	-	+
Bit 02	Soft key 3	+	-	+
Bit 03	Soft key 4	+	-	+
Bit 04	Soft key 5	-	-	+
Bit 05	Soft key 6	-	-	+
Bit 06	Soft key 7	-	-	+
Bit 07	Soft key 8	-	-	+
Bit 08	*1) key image	+	+	+
Bit 09	key image	+	+	+
Bit 10	key image	+	+	+
Bit 11	key image	+	+	+
Bit 12	key image	+	+	+
Bit 13	key image	+	+	+
Bit 14	key image	+	+	+
Bit 15	key image	+	+	+

*1) key image

In the high byte of the +05 start address of the keyboard area the keystrokes are shown in the form of a hexadecimal image.

As follows:

Key	Hex value
F1 to F16	60 - 6F
Shift F1 to Shift F16	80 - 8F
Alt F1 to Alt F16	A0 - AF
Ctrl F1 to Ctrl F16	C0 - CF
S1 to S8	21 - 28
Cursor up	0B
Cursor down	16
Cursor left	08
Cursor right	0C
Del. and/or Escape	1B
Enter	0D

		applies to
Start address + 06	Key	MT/ET-65	ET75	MT/ET-125
Bit 00	Input 1	+	+	+
Bit 01	Input 2	+	+	+
Bit 02	Input 3	+	+	+
Bit 03	Input 4	+	+	+
Bit 04	Input 5	+	+	+
Bit 05	Input 6	+	+	+
Bit 06	Input 7	+	+	+
Bit 07	Input 8	+	+	+
Bit 08	not used
Bit 09	not used
Bit 10	not used
Bit 11	not used
Bit 12	not used
Bit 13	not used
Bit 14	not used
Bit 15	not used

<< return