Confirm fault message


chiclet ET/MT-3x6 & ET/MT-2x8 SERIES

Auswahl Hilfen previous top next english version

FunctionsET/MT-3x6, ET/MT-2x8Falcon-SerieConfirm fault message


Error messages that were designed as dynamic errors must be acknowledged with ENTER instead of ESC from application software version 5.xx onwards. Lower versions of application software still require ESC to acknowledge dynamic errors. The error messages are only taken from the list once they have been acknowledged. Error messages that were acknowledged but are still active are marked by a “+” after the last digit. The alarm LED at the operator interface will also continue to flash.



<< return