Setup in SPSPlusWIN

Auswahl Hilfen previous top next english version

Data exchangeCoupling Operator Interface to ABB AC 800 C/MSetup in SPSPlusWIN

 

To setup the ABB MMS project you need to define the IP address of the Operator interface and PLC station.

 

1. Setting the IP address of the Operator Interface.

To assign a protocol driver to the port, proceed as follows.

» Open the PORT path in the object explorer.

» Highlight the port to which you want to assign a protocol driver (e.g., TCP/IP Channel 1).

» Call NEW OBJECT

by the  EDIT-NEW menu, or
by pressing <STRG+I> on the keyboard, or
by NEW in the context menu.

 

If no protocol driver exists, the PORT PARAMETER dialogue opens.

» Enter a symbolic name in the DRIVER NAME box.

» Select the protocol MMS AC800 from the list in the TYPE OF UNIT / OF PROTOCOL box.

 

More protocol-related boxes are shown in COMMUNICATION PARAMETERS.

» Enter a IP address for the Operator Interface

» Press "OK" to confirm your entries.

 

For the option "Update PLC symbols" please read chapter Import variable via Excel

 

port

 

2.        Setting the IP address of the PLC Station

To add a new control to a port, proceed as follows:

 

» Highlight the port to which you want to assign a control (e.g., COM1).

» Call NEW OBJECT

by the  EDIT-NEW menu, or
by pressing <STRG+I> on the keyboard, or
by NEW in the context menu.

 

The STATION PARAMETERS dialogue opens.

 

station

 

On the BASE page, you can define a control by entering a symbolic name. Enter the IP-Address of the AC-800 station. Entries in the other boxes are optional.

 

There is one page each for several communication areas, such as fault messages, operating messages, curves, etc., in which addresses and lengths of data areas can be defined.