The DP slave participant is addressed within profibus either via the Fieldbus-Bridge itself or via the operator interface. For this, the two S3 and S4 rotary switches are used.
Addressing via the Fieldbus-Bridge:
The station address (DP-slave participant address) is set in hexadecimal format. The following selection of switch settings defines the corresponding addresses:
Please note that you may only use addresses from 3 to 254 !
Addressing via the operator interface:
Set address FF at the Fieldbus-Bridge so that addressing can be done via the operator interface.
Subsequently you may enter the DP slave adderess in the operator interface menu.