KVM-Box internal

 Vorheriges Oben Nächstes Helps selection copy topic address english version

HMIs, human machine interfaces ► Thin Client, ET/MT-5x7-... ► Host-PC Configuration ► KVM-Box internal

 

funktionsprinzipien_kvm

 

 

For the standard application of the Thin Client system with a connection to the KVM box, no configuration of the KVM box via this system menu is required !

 

A network configuration of the associated KVM box(es) only becomes necessary if connection set-ups or schemas are used that deviate from the standard, or if the IP address of the KVM box ix changed.. For this purpose, the KVM box has a configuration menu where these network settings can be made.

 

Hinweis

The configuration menu of the KVM box is only available in English!

 

Hinweis

For the configuration menu of the KVM box to be called up, a keyboard and a monitor must be connected to the console field of the KVM box.

The configuration menu can only be accessed via this connection!

 

Weitere Informationen zum Anschluss von Tastatur und Monitor an das Konsolenfeld der KVM-Box entnehmen Sie bitte dem Handbuch zu den KVM-Systemen Kapitel Symb_Internet KVM-Box Anschlüsse.für die Serie 600 oder Symb_Internet KVM-Box Anschlüsse.für die Serie 500.

 

The configuration menu is called up by pressing the <CTR + ALT C>.

 

Naviagation within the configuration menu

Within the configuration menu, the selected menu item is indicated by flashing characters < and >. Use the tab key or the up and down arrows to navigate within the menu. Within menu items that allow a selection, this is changed with the left and right arrow and the actual selection is then made with the Enter key.

Use the ESC key to exit the menu, sub-menu and close the configuration menu of the KVM box. Depending on the current menu or cursor position, pressing the ESC key will take you back one step to the previous menu or will close the configuration menu. Depending on your position within the menu, you may need to press ESC several times to exit the configuration menu completely.

 

Einrichten einer KVM-Verbindung:

1.

Funktionen Konfigurationsmenü

Kapitelseite Konfigurationsmenüaufruf

2.

Benutzeranmeldung in der KVM-Box

Kapitelseite Useranmeldung

3.

Verbindung zum Host-Rechner erstellen

Kapitelseite Netzwerkkonfiguration

4.

Informationen zu PS2-Mausverbindung, Videokalibrierung und Zugriffsmodus

Kapitelseite Weitere Menüeinstellungen

 

 

 

 

<< back