Start

Vorheriges Oben Nächstes Helps selection copy topic address english version

HMIs, human machine interfacesPanel PC, ET / MT 4x8...System reloadStart Recovery PE

 

To start the application proceed as follows:

 

Switch off the device.

For xT-4x8 devices, remove any plug that may be attached to terminal X35 to free up the USB slot.

Insert the USB stick / USB drive that contains the recovery file (image file) into the Ex-i type A USB slot in the Ex-i terminal range.

Switch on the device.

 

The application will start up:

Fgr_RecoveryStartScreen

 

 

<< back next >>