Switching off / closing down

Vorheriges Oben Nächstes Helps selection copy topic address english version

HMIs, human machine interfacesPanel PC, ET / MT 4x8...OperationSwitching off / closing down


As is the routine with a PC, you shut down the device by clicking on "Start" and "Shut down". The familiar "shut down Windows" dialogue will open.



It is therefore important for the safe and correct operation that the Panel PC is "shut down" properly (see illustration below) and not simply switched off.


Otherwise the existing image of the device may be damaged, rendering the device non-functioning.


Click to expand or collaps object.        Dialog, Windows herunterfahren:




After the data has been stored, Windows informs the user that the Panel PC can now be switched off.



Only switch off the Panel PC once you have received this message.


The Microsoft Windows operating system stores key data in the main memory, regardless of the application, and has to store this data on the hard disk before the Panel PC is switched off.


<< back