Serial Link

Vorheriges Oben Nächstes Helps selection copy topic address english version

HMIs, human machine interfacesPanel PC, ET / MT - 4x7SoftwareSerial Link

 

To use a reader together with the Panel PCs it is NOT enough to simply connect the reader in hardware terms.

 

For the data to be transferred from the reader to the Panel PC, your application needs to be able to directly read and process the data of the serial interface that is connected to the reader.

If the application cannot read and process the data directly at the serial interface, it is possible to read the data of the serial interface and write them into the keyboard buffer in the form of key codes.

The application then needs to read and process (display, store, etc.) these key codes at the appropriate point from the keyboard buffer.

For this it is sufficient to place the focus for keyboard input onto an input field, a text field or similar.

 

R. STAHL HMI's Serial Link software tool contains this functionality.

This software tool is sold by R. STAHL HMI Systems GmbH in the form of a CD plus license number.

 

Special software** for managing the data transfer from / to the card reader is required for a Mifare card reader.

 

**

Hinweis

Please contact R. STAHL HMI Systems GmbH if you have any questions regarding the required software.

 

 

This section only contains a description of the Serial Link settings required for the correct reading of reader data.

 

BookMark

For a more detailed description of the software, please refer to its Online Help.

 

The Serial Link software must be installed on the Panel PC (installation is factory standard if ordered via R. STAHL HMI Systems GmbH).

 

Installation directory (standard)

 ' C:\Programme\Nth Generation\Serial Link '

 

 

Weitere Kapitel:

 

Klicken Sie hier um untergeordnete Kapitel anzuzeigen bzw. geöffnete zu schließen. Lizenzierung

Kapitelseite Aktivierung

Klicken Sie hier um untergeordnete Kapitel anzuzeigen bzw. geöffnete zu schließen. Starten

Klicken Sie hier um untergeordnete Kapitel anzuzeigen bzw. geöffnete zu schließen. Setup

Kapitelseite Kommunikationsparameter

Klicken Sie hier um untergeordnete Kapitel anzuzeigen bzw. geöffnete zu schließen. Options

Kapitelseite Zielfenster

Kapitelseite Betrieb

Kapitelseite Stoppen

 

 

<< back