Communication parameters

Vorheriges Oben Nächstes Helps selection copy topic address english version

HMIs, human machine interfacesPanel PC ET/MT-4x6...SoftwareSerial LinkStartSet-upCommunication parameters

 

First of all, you need to determine the interface with which communication is to take place. For this, click on the following menu item: SERIAL PORT, and "Port Configuration" will pop up.

 

SerialLink_ComConfg

 

The definition of an interface requires settings in the "COMMUNICATION PARAMETERS" field area. Select the COM port (COM 1 or COM 2), to which the reader has been connected.

 

Hinweis

If the data of a reader connected to the X8 terminals is to be read, you must select COM 2.

 

All other settings in the "COMMUNICATION PARAMETERS" field area should be adapted to those of the reader.

 

 

<< back