Project engineering

Vorheriges Oben Nächstes Helps selection copy topic address english version

HMIs, human machine interfacesEagle ET/MT-3x6...Project engineering

 

 

Further information project engineering software:

Symb_Internet SPSPlusWin

 

See also:

Kapitelseite Installation project engineering software

 

With Movicon:

Click onBtn_NewDocument to open a new document.

 

The dialogue for selecting the target platform will pop up.

1

 

Select 'WinCE platform" as a target platform for the ET-208 or 'Win32/64 platform" for ET/MT-3x6-A-BS-... devices.

 

The dialogue for the basic project data will pop up.

2

 

Allocate a descriptive name for the project (document).

Select the directory to which you want to save the project.

Set other parameters as required, if necessary with the aid of Movicon.

Click on "Next >" to continue the dialogue.

 

The dialogue for the project password protection will pop up.

3

 

Set parameters as required, if necessary with the aid of Movicon.

Click on "Next >" to continue the dialogue.

 

The dialogue for the selection of the communication driver will pop up:

4

 

Select the driver suitable for the communication module (PLC) used in the target environment.

Further adjustments to the communication parameters can be made during the development phase. You may contact Movicon for help.

Click on "Next >" to continue the dialogue.

 

The dialogue for the parameter settings of the process images will pop up:

5

 

Set the "Default Screen Width" parameter for the ET-208 to 800, for ET/MT-3x6 set the screen pixels horizontally of the target device.

Set the "Default Screen Height" parameter for the ET-208 to 480, for ET/MT-3x6 set the screen pixels vertically of the target device.

Activate the other parameters as required, if necessary with the aid of Movicon.

Click on "Next >" to continue the dialogue.

 

The dialogue for setting logger parameters will pop up:

6

 

Activate the parameters as required, if necessary with the aid of Movicon.

Click on "Next >" to continue the dialogue.

 

Es öffnet sich der Dialog für die Alarm-Parameter:

7

 

Activate the parameters as required, if necessary with the aid of Movicon.

Click on "Finish" to complete the dialogue and open the project.

 

 

<< back