The card reader is marketed by R. STAHL HMI Systems under the name of MCRi-Mifare. It is an intrinsically safe proximity reader for use with devices version ET-xx6-RSi up to device hardware revision 2. The RFID is used for devices with hardware revision 3.
The MCRi-HID-Swipe Wiegand card reader can be mounted on a vertical plane.. Swipe direction can be from top to bottom, right to left or in the opposite directions, depending on the way the reader is mounted.
If the Wiegand card reader should be fixed to the field enclosure of the device, please state the position you require when ordering.
If the Wiegand card reader has NOT been mounted by the manufacturer, a sufficiently large space for mounting must be provided.