Function

Accessories ► KVM-DVI3-Units-... ► General Information

This manual only describes the device function. All safety-relevant data is contained in the associated Operating Instructions.

For the correct operation of all associated components please note, in addition to these operating instructions, all other operating instructions enclosed in this delivery as well as the operating instructions of the additional equipment to be connected !

All transmission units are used for classic point-to-point data connection from a PC outside of the production area to an on-site HMI. The data transmission to the PC is via VGA/DVI or USB/PS2 and a copper or optical fibre connection to the on-site HMI, realised as digital data transfer. Depending on cable connection and transmission technology the distance between the transmission unit and the Remote HMI ranges from 140m (copper cable) to 10,000m (optical fibre).

The transmission technologies available are the KVM Classic version DVI3, for which the appropriate transmission units exists (see type code).

Communication takes place by The DVI and sound signals being received by the local PC, and the keyboard and mouse signals being received at the Remote HMI (display). They are transmitted via Ethernet copper cable (twisted pair, up to 150 / 500 m) or fibre optic (FO, up to 10 km) via a direct connection.

Functional principle HMI to DVI3-KVM-Unit

Fgr_MANTA-6x7_Kvm

Version	Data	HMI	Ethernet	KVM-DVI3-Box
KVM-DVI3-...	DVI	←	Copper (Twisted Pair) or Optical fibre (multi-mode or single mode)	DVI
	Sound IN	←		Sound OUT
	Sound OUT	not used		.-.
	Keyboard	→		Keyboard and mouse via USB
	Mouse	→		Keyboard and mouse via USB

The HMI is immediately available, ready to run, without any installation of drivers or software.

Functional principle display to DVI3-KVM-RU-Unit:

Fgr_KvmRu

Version	Data	KVM-DVI3-Box	Ethernet	KVM-DVI3-Box
KVM-DVI3-RU-...	DVI	←	Copper (Twisted Pair) or Optical fibre (multi-mode or single mode)	DVI
	Sound IN	←		Sound OUT
	Sound OUT	→		Sound IN
	Keyboard	→		Keyboard
	Mouse	→		Mouse

<< back