with DINRailKit

Vorheriges Oben Nächstes Helps selection copy topic address english version

AccessoriesKVM-DVI3-Units-...Mechanical Installation

 

Quantity

Designation

#

1

Mounting plate for DINRailKit DVI2/DVI3

1

1

DIN fastening

2

6

cross-recessed raised head screws M4 x 6

3

 

The following contains an explanation of how to mount the KVM-DVI3-Box to the DINRailKit DVI2/DVI3.

 

Fix the DIN mounting (2) with the screws (3) from below to the mounting plate of the DINRailKit DVI2/DVI3 (1)

Tighten the screws

 

Fgr_DINHldrMount

 

Unscrew both screws (5) at the front and back of the KVM-Box

 

KVM_DVI3_CAT_Front_SrwVw

 

Slide the KVM-Box with its front plate (6) and back plate (7) into the angle brackets (4) at the DINRailKit DVI2/DVI3 mounting plate

 

fgr_DVIMountToHolder

 

Use the 4 screws (5) to screw the KVM-Box onto the DINRailKit DVI2/DVI3 mounting plate

Use the ears (8) of the mounting plate for the DINRailKit DVI2/DVI3 (1) to fix the cables with cable ties (see 9)

 

Fgr_CableMountView

 

See also: Diagrams and Dimensions

 

 

<< back