JSi assembly inside field enclosure

Accessories ► Joystick JSi ► Electrical installation ► Connections JSi

The joysticks are fitted with a connection cable that can be connected to the corresponding terminals at the series 400 Panel PCs and series 500 Thin Clients.

The cable of the JSi-1-PS2 joystick is connected to the X9 Keyboard/Mouse/Trackball/Joystick terminal block of the HMIs.

The cable of the JSi-2-USB-... joystick is connected to the X6 USB2 terminal block of the series 4x6 / 5x6 or at the X12 terminal block of the series 4x7 / 5x7 devices.

JSi-1-PS2

Joystick

Connection cables

HMI device

Signal

+5 V

Data

Clock rate

Earth

Shielding

OI-TBi_JSi_Cable_Pining

Colour coding	Signal	X9 Pin
Yellow	VCC	1
Brown	MSDAT	4
White	MSCLK	5
Green	GND	6
Green / yellow	Shielding	Equipotential bonding

Cable

HMI-Device

Fgr_TBi_JSi_Cable

Wire- colour	Signal	Pin X9
Yellow	VCC	1
Brown	MSDAT	4
White	MSCLK	5
Green	GND	6
Green/ Yellow	Shield	PE

Notice

Devices where the ground of the USB interface is identical with the equipotential bonding connection, the shielding can be connected together with the USB ground in one terminal.

They must then be both clamped into the same core end sleeve.

JSi-1-USB