Touch Calib.

Vorheriges Oben Nächstes Helps selection copy topic address english version

HMIs, human machine interfacesET-208Initial start-upConfiguration deviceMain menuTouch Calib.

 

If the touch screen is not working properly within the application, you can re-calibrate it.

 

Use the <F8> » TOUCH CALIB key in the (Main Menu ) to call up the Touch Calibration menu.

 

An Symb_CalibrPoint arrow with a dot pops up (1. top left, 2. top right, 3. centre (cross with dot), 4. bottom left, 5. bottom right). In older versions an "*" (asterisk) will appear on the screen four times in a row (1. top left, 2. top right, 3. bottom left, 4. bottom right).

Tap exactly on the dot or the asterisk. The touch screen is then re-calibrated and the system returns to the main menu, or you have to confirm your input by pressing the CONFIRM button *1).

 

*1)

The CONFIRM button only exists for series 200 devices.

 

Hinweis

In case you tapped the wrong place during the calibration, it may be impossible to press the CONFIRM button.

 

In such a case, wait a few seconds until the calibration window closes on its own accord and then

repeat the calibration by pressing the <F8> » TOUCH CALIB key.

 

See Symb_ExtKaptlExpand Main menu

 

 

<< back