Installation project engineering software

Vorheriges Oben Nächstes Helps selection copy topic address english version

HMIs, human machine interfacesET-208Installation project engineering software

 

The "SPSPlusWIN" project engineering software is provided to create applications for the devices of the ET/MT-3x6, ET-208 and the Falcon series. In the case of the ET/MT-3x6 and ET-208 series you can also use the  "Movicon" project engineering software from Progea. Both must be installed on a Windows PC. This chapter gives an overview of the installation of R. STAHL HMI Systems GmbH "SPSPlusWIN" and Progea's "Movicon" *1 project engineering software.

 

*1)

Movicon can only be run on devices with Baytrail single core processors from hardware version 3.xx onwards.

 

Click to expand or collaps information.  SPSPlusWin

 

Insert the USB-Stick.

Windows will start the installation program automatically (if the autostart is enabled).

The following display will pop up:

 

Mnu_StartPage

 

Select the language for the set-up installation.

The following selection menu will pop up:

 

Mnu_FirstSelectPage_en

 

Click "Installation SPSPlusWIN" to continue with the installation of SPSPLUSWIN.

 

Mnu_InstPage_en

 

A message window will appear for a couple of seconds.

In the next dialogue select the language you prefer for the set-up routine of SPSPLUSWIN.

 

Inst_SelectLanguageDlg

 

Click "OK" to continue with the installation.

The following information window will inform the user on the progress of the set-up routine.

 

Inst_PrepareInstallingDlg

 

You will then be asked to enter the serial number, the name of the company and the name of the user.

The serial number is printed on your SPSPlusWin invoice.

 

Inst_SerialCheck

 

Click "OK" to continue with the installation.

The first window of the set-up dialogue will pop up.

 

Inst_DlgMsg1

 

Click on "Next" or cancel the process.

In the second window of the set-up dialogue users are asked to specify the target directory for the software.

Click on "Next" to continue or "Browse" to select a target directory different from the one suggested.

 

Inst_DlgDestFolder

 

Click "Next" to continue with the installation.

The next dialogue window of the set-up allows you to

accept the suggested name for the program manager group

or to change it to suit your needs.

 

Inst_SelProgMangGroup

 

Click on "Next" to continue with the installation.

The set-up installation routine will now start.

The files necessary for SPSPlusWin will now be installed on your computer.

A progress bar appears to inform the user about the time remaining until the installation is complete.

 

Inst_DlgFileInstalling

 

Once the installation is complete you can define the type of document association.

 

Inst_DlgDefDocAssociations

 

If you wish for SPSPlusWin to start directly after a double-click on a file tick the appropriate file type.

 

Hinweis

With this you write over the application software allocated to this file type.

For example, when you then double-click on a "*.zip" file, SPSPlusWin starts instead of your usual program for zip-files.

 

If you wish to start SPSPlusWin via a file by means of a Context menu tick the appropriate file type.

 

Hinweis

With such a tick you instruct Windows to generate a reference to SPSPlusWin in the Explorer context menu for this file type.

With this you can open files of this type in the Explorer via the context menu directly from SPSPlusWin.

 

 

We recommend you accept the default settings.

Click "OK" to accept the default settings.

The last set-up dialogue window will pop up.

 

Inst_DlgFinish

 

Click on "Finish" to complete the set-up.

In the following dialogue you can determine whether

a) SPSPlusWin will be started immediately, and

b) the Readme file will open, where you can find important information.

 

Inst_DlgStartInfo

 

Click "OK" to close the dialogue.

You have now successfully installed SPSPlusWin.

 

 

The installation stick contains other menu directories.

 

MnuDet_OtherSelections_en

 

In the Open HMI, Eagle and Falcon menus you will find the latest operating instructions and manuals at the time the Stick was generated.

These include important information on the installation and operation of the devices and their technical details.

 

 

Further Informations project engineering software:

Symb_Internet SPSPlusWin-Hilfe

 

If you have any questions or encounter any problems when installing SPSPlusWIN please contact our support Symb_Internet http://www.stahl-hmi.de/en/supports.html.

 

Click to expand or collaps information. Movicon

 

Insert the CD with the "Movicon" software into your PC's CD drive.

Windows will start the installation program automatically (if the autostart of CDs is enabled).

The follwoing display will pop up:

 

Dlg_Inst_1

 

Select the language for the set-up installation.

The following selection menu will pop up:

 

Dlg_Inst_2

 

Click on 'Installing Movicon 11.4".

The installation assistant window will pop up.

 

Dlg_Inst_3

 

Click on "Next".

The dialogue for selecting language-specific manuals will pop up.

 

Dlg_Inst_4

 

Select the manuals you want to store in Movicon's application directory in addition to that written in the selected installation language.

Click on "Next".

The licensing issues dialogue will pop up.

 

Dlg_Inst_5

 

Click on "I accept the conditions of the license agreements" if you wish to continue with the installation.

Now click on "Next" to continue with the installation.

The window for the user information will pop up.

 

Dlg_Inst_6

 

Movicon adopts the user information from Windows.

Change these if necessary, and click on "Next".

The dialogue for specifying the scope of the installation will now pop up.

 

Dlg_Inst_7

 

Click to expand or collaps information.  Fenster der Standardinstallation

 

Dlg_Inst_8

 

Click on "Install" to proceed with the standard installation.

 

 

Click to expand or collaps information.  Dialog zur Auswahl der zu installierenden Features (Angepasst)

 

Dlg_Inst_8b

 

Select the features you need for your application.

Click on "Next" to install the selected features.

 

A window indicating the progress of the installation (checking) will now pop up.

 

Dlg_Inst_9

 

EsA window indicating the progress of the installation (copying data) will now pop up.

 

Dlg_Inst_10

 

Depending on which program features were selected the following window may pop up.

For the installation of software for the use of a USB dongle.

 

Dlg_Inst_11

 

As the last step of the installation the data required for registering the application in the Windows environment are written in the registry.

 

Dlg_Inst_13

 

You will then receive a message notifying you of the successful installation of Movicon.

 

Dlg_Inst_14

 

Click on "Complete" to finish the installation.

 

 

For any problems or questions concerning the installation please refer to the manufacturer's manuals on the installation CD.

 

<< back