KVM at Thin Client

 Vorheriges Oben Nächstes Helps selection copy topic address english version

HMIs, human machine interfaces ► Thin Client, ET/MT-5x7-... ► Connection of ► KVM-INFINITY-DUAL-2112T ► KVM at Thin Client

 

The Thin Client station is connected to the KVM box via an Ethernet connection which can consist of copper (Tx) or optical fibre (Fx).

 

Click to expand or collaps object. Ethernet TX connection ET / MT-5x7:

Safety area

Ex - area

 

Front side cut out

KVM.Box

X16 terminal

Ethernet 100Base TX


 

Fgr_EthernetCon5x7ToKVM

1

TRD0+

White

2

TRD0-

Blue

3

TRD1+

Yellow

4

TRD1-

Orange

 

Cable shield

fixation

VB-RJ-45-PLUG-180

cable

Ethernet-cable

shield


 

 

Cable and pin assignment:

 

Frg_EthrntCablePining

 

Hinweis

In case of problems with the wiring shown here (cross-link connection)

use a 1:1 pin assignment instead.

 

 

Hinweis

The individual pairs of the Ethernet cables must be twisted right up to the terminals.

This ensures an interference-free connection.

 

Click to expand or collaps object. Ethernet FX connection ET / MT-5x7:

Safety area

Ex - area

KVM-Box

Ethernet connection

Media Converter

SK-EL1000-2GU-3TX-4SX-opis

in the control cabinet or console

X18 Clipping

Connection compartment HMI

Fgr_FxEthernetCon_xx7

Twisted pair cable

Length <=100m

FO cable

with SC - Plugs

Length <=2000m

 

See also:

Kapitelseite Ethernet Connection Informations

 

 

<< back