Audio Informations

Vorheriges Oben Nächstes Helps selection copy topic address english version

HMIs, human machine interfacesThin Client, ET/MT-5x7-...Connection ofConnection informationsAudio Informations

 

Since September 2011, the ET/MT-xx7 series has been fitted with an Ex-e stereo input/output for the connection of external audio signal sources or audio output devices to the displays.

 

Hinweis

For devices with sound option (xT-5x7-...-snd-...)

this is where both loudspeakers are connected (see cicon2 X105, Audio Out) !

 

Warnhinweis

These audio devices must be of protection class Ex-nA "non-sparking".

 

A screened audio cable must be used to connect the input / output.

 

Hinweis

We recommend the individual wires of the audio cable be fitted with core end sleeves.

 

Hinweis

The individual signal wires

should have their own shielding.

 

Connection to an Ex-e audio output device with terminal connection:

X105

Audio output device

Pin

Terminals *2  

1

2

5

Cbl_PinningLine_To_Conector


Shielding of the audio cable

*2)

For the exact terminal assignment please refer to the

documentation for the Ex-e audio output device.


 

Connection to an Ex-e audio output device with audio jack:

X105

Plug

Pin

3.5 mm

1

2

5

 

Cbl_PinningLine_To_Jack


Shielding of the audio cable

 

On the previous versions:

 

Measures for the suppression of ground loops:

a)Separate ground wire (GND)

b)Shielding single-sided at the audio output device.

 

 

Connection to an Ex-e audio output device with cinch connector:

X105

Cinch

Pin

Plug

1

2

5

Cbl_PinningLine_To_Cinch


Shielding of the audio cable

 

See also:

Kapitelseite Ground loops, with asymmetric signals

 

 

<< back