X9 Audio / Video

 Vorheriges Oben Nächstes Helps selection copy topic address english version

HMIs, human machine interfaces ► KVM-Systems, ET/MT-6x8... ► Electrical Installation ► Connection of ► X9 Audio / Video

 

The X9 port is a dual-function port:

a)an output port for a stereo audio signal.

b)an input port of a composite video signal (FBAS).

 

Fgr_X9_VideoIn_LineOut

1

2

3

4

5

Symb_Caution1_30x30

Caution

Please take note of the values

of the X9 signal interface (Ex-e or Ex-nA) in the Operating Instructions.

 

*1)

only at AMD processor and ET - / MT - 6x8 SERIES DVI0/CAM version.

*2)

only ET - / MT - 6x8 SERIES DVI0/CAM version (not yet available).

 

Typical pin configuration for

a connection to an audio output device.

Audio output device

Pin

Terminals *3  

1

2

3

Cbl_PinningLine_To_Conector

Shielding of the audio cable

*3)

For the exact terminal assignment please refer to the

documentation for the Ex-e (Ex-nA) audio output device.

 

Plug

Pin

3.5 mm

1

2

3

 

Cbl_PinningLine_To_Jack

Shielding of the audio cable

 

The individual signal wires should have their own shielding.

 

Measures for the suppression of ground loops:

a)Separate ground wire (GND)

b)Shielding single-sided at the plug.

 

 

Cinch

Pin

Plug

1

2

3

Cbl_PinningLine_To_Cinch

Shielding of the audio cable

 

Video:

Typical pin configuration for

a connection to a video device.

Cinch

Pin

Plug or socket

4

5

 

Cbl_PinningVideoIn_To_Cinch

Shielding of the 75 Ohm coaxial cable

 

See also:

X9
Line Out / Video 		BtnSymbol

 

 

<< back