KVM at Thin Client

Vorheriges Oben Nächstes Helps selection copy topic address english version

HMIs, human machine interfacesThin Client, ET/MT-5x7-...Connection ofKVM-DIGITAL-IPESKVM at Thin Client

 

The Thin Client station is connected to the KVM box via an Ethernet connection which can consist of copper (Tx) or optical fibre (Fx).

 

Click to expand or collaps object. Ethernet Tx-connection ET / MT-5x6:



Safety area

hazardous area


 

Front side cut out

KVM.Box

X16 terminal

Ethernet 100Base TX


 

Fgr_EthernetCon5x7IpesToKVM

1

TRD0+

White

2

TRD0-

Blue

3

TRD1+

Yellow

4

TRD1-

Orange

 

Cable shield

fixation

VB-RJ-45-PLUG-180

cable

Ethernet-cable

shield


 

 

1)

IEC low-power connector plug of included power supply.

*2)

The field cable is available in variable length.

 

Cable and connector assignment:

 

Frg_EthrntCablePining

 

Hinweis

In case of problems with the wiring shown here (cross-link connection)

use a 1:1 pin assignment instead.

 

 

Hinweis

The individual pairs of the Ethernet cables must be twisted right up to the terminals.

This ensures an interference-free connection.

 

Click to expand or collaps object. Ethernet FX connection ET / MT-5x7:

Safety area

hazardous area

KVM-Box

Ethernet connection

Media Converter

SK-EL1000-2GU-3TX-4SX-opis

in the control cabinet or console

X18 Clipping

Connection compartment HMI

Fgr_FxEthernetConIpes_xx7

Twisted pair cable *2

Length <=100m


LWL - cable *2

with LC - Plugs

Length <= 2000m

 

1)

IEC low-power connector plug of included power supply.

*2)

The field cable is available in variable length.

 

See also:

Kapitelseite Ethernet Connection Informations

 

 

<< back