KVM-DIGITAL-IPES

Vorheriges Oben Nächstes Helps selection copy topic address english version

HMIs, human machine interfacesThin Client, ET/MT-5x7-...Connection ofKVM-DIGITAL-IPES

 

Principal set-up KVM system:

 

The standard application of the KVM system is a direct Ethernet connection via the KVM box to the host PC. In turn, this host PC is connected to the KVM box via a DVI cable for the video signal and a USB cable for mouse, key and touch function.

As an option, the audio output of the host computer can be transmitted.

If all components have been properly connected, the remote station will display the screen contents of the host PC automatically after having been switched on. The (virtual) keyboard, any pointer devices connected to the Remote HMI and the touch screen (after calibration) of the operator interface will also work immediately. No further settings are required for this standard application.

 

Hinweis

Depending on the size of the application a keyboard and mouse might be required !

 

Click to expand or collaps object. Direct connection of the control panel model TX Ethernet:

 

safety area

hazardous area

Computer

KVM-Box

Thin Client

Fgr_KVMIpes_viaEthernetTx

*1 = Video cable

*2 = USB cable

mouse, key and touch signals

*3 = Sound out PC to HMI

Cat5 -  Ethernet cable

 

 

Click to expand or collaps object. Direct connection of the control panel model FX Ethernet:

 

safety area

hazardous area

Computer

KVM-Box

9721

Thin Client

Fgr_KVMIpes_viaEthernetFx

*1 = Video cable

*2 = USB cable

mouse, key and touch signals

*3 = Sound out PC to HMI

 

Cat5 -  Ethernet cable

 

FO - multi-mode *2

 

 

 

Connection details see:

Kapitelseite KVM at Thin Client

Kapitelseite Host-Pc Connections

Kapitelseite Audio Connections

Kapitelseite KVM-Box Connections

 

Information of connection ethernet see chapters cicon2 Ethernet Informations

 

See also:

Kapitelseite KVM at Thin Client

Kapitelseite Ethernet via LWL

 

 

<< back