USB Information

HMIs, human machine interfaces ► Thin Client ET/MT-5x6 ► Connection informations ► USB Information

The USB0 and USB2 Ex-i interfaces are intended for the internal connection of USBi Drives. The USB0 (X4) terminal is for the direct connection of a USBi drive inside the operator itnerface. At the USB2 (X6) terminal, an optional "VB-USB_Plug-1" cable can be connected, thus moving the Ex-i USB connection to the outside of the operator interface. The cable has a USB-A connector for the USBi drive, making it accessible from the outside.

ET/MT-xx6, ET/MT-xx6-Fx-..., ET/MT-xx6-Tx-... and ETMT-xx6-A-...

X6	1	VCC	USB2 Ex-i
	2	USB -
	3	USB +
	4	GND
	5	GND not Rev. 1 devices

Terminal

USB2 (X6)

USB-Plug

X6_PinningRev2_en

The maximum joint power supply of USB0 (X4) and USB2 (X6) is 500mA.

<< back