Anchluß von Steuerungssystemen

 Vorheriges Oben Nächstes Helps selection copy topic address english version

HMIs, human machine interfaces ► Thin Client ET/MT-5x6 ► Connection of ► KVM with Dual Infinity Box

 

Principal set-up KVM system:

 

The standard application of the KVM system is a direct Ethernet connection via the KVM box to the host PC. In turn, this host PC is connected to the KVM box via a DVI cable for the video signal and a USB cable for mouse, key and touch function.

If all components have been properly connected, the remote station will display the screen contents of the host PC automatically after having been switched on. The (virtual) keyboard, any pointer devices connected to the Remote HMI and the touch screen (after calibration) of the operator interface will also work immediately. No further settings are required for this standard application.

 

Hinweis

Depending on the size of the application a keyboard and mouse might be required !

 

Click to expand or collaps object. Direct connection of the control panel model TX Ethernet:

safety area

hazardous area

Computer

KVM-Box

Thin Client

Fgr_KVMxx6_viaEthernetTx

*1 = Video cable

*2 = USB cable

mouse, key and touch signals

 

Cat5 -  Ethernet cable

 

Click to expand or collaps object. Direct connection of the control panel model FX Ethernet:

safety area

hazardous area

Computer

KVM-Box

9721

Thin Client

Fgr_KVMxx6_viaEthernetFx

*1 = Video cable

*2 = USB cable

mouse, key and touch signals

 

Cat5 -  Ethernet cable

 

FO - multi-mode

 

 

See the connections in detail:

 

For information on connecting an Ethernet connection, refer to the chapter cicon2 via Ethernet IP

 

 

<< back