Antennae X36 / X37

Vorheriges Oben Nächstes Helps selection copy topic address english version

HMIs, human machine interfacesPanel PC, ET / MT 4x8...Electrical InstallationConnection ofAntennea X36 / X37

 

The installation of one or both antennae is usually not required as they are already installed when ordering a device with optional WLAN.

 

Only

in the case of adding a second antenna

when mounting an antenna at a place with better reception

or when servicing

will the information and notes listed here become necessary.

 

Three different antennae are available for the devices:

 


iANT212 for 2.4 Ghz

iANT213 for 2.4 Ghz

iANT213 for 5 Ghz

Antenna

Antenna_iAnt212

Antenna_iAnt213

Antenna_iAnt213

Connector plug

N_bulkhead

N Socket

N_plug

N Plug

 

Connect the antennae to the WLAN connection with the pre-assembled connecting cable (1 m).

 

Hinweis

To mount the antenna, the existing cable gland must be replaced with the one included in the delivery.

 

Only this cable gland ensures that the connection plug of the connecting cable can be safely threaded into the connection box and that the screw connection is securely sealed.

 

Fgr_Ex-i_ConX36_37

 

 

Connection to X36 and X37

Cable gland in lid

Fgr_Ex-i_ConX36_37_CableCon

Fgr_X36_37_CableIn

 

Hinweis

Mount the antenna (to the device ) or at a suitable position.

 

Hinweis

The frequency of the internal WLAN router must be adjusted to correspond to the type of the antenna used.

 

See also:

Symb_ExtKaptlExpand to the device

Kapitelseite Initial Commissioning, WLAN Configuration

 

 

<< back