RS232 an X2

Vorheriges Oben Nächstes Helps selection copy topic address english version

HMIs, human machine interfacesPanel PC ET/MT-4x6...Electrical InstallationConnection ofRS-485 to X2

 

The X2 and X3 ports of our HMIs provide you with the option of using an RS-422 or an RS-485 bus, depending on the wiring. Below is an example of how this works with an RS-485.

 

The RS-485 (today: EIA-485) provides a data transfer interface with differentiated signals. Please note that the RS-485 bus is a bi-directional interface. This means that the interface sends and receives data. Connected devices therefore have to ensure communication can take place.

 

The following illustration shows how it should be connected to the interface:

 

X2_X3_RS-485-Bus

 

Hinweis

Pins 1-5, 2-6, 3-7, 4-8 are already internally connected.

 

Hinweis

The maximum length of the data transmission cable is 1000m.

 

See also:

Kapitelseite RS 485 information

Kapitelseite X2, RS-232, RS-422 und RS-485

 

<< back