USB Information

Vorheriges Oben Nächstes Helps selection copy topic address english version

HMIs, human machine interfacesEagle ET/MT-3x6...Connection InformationsUSB Information

 

The USB0 and USB2 Ex-i interfaces are intended for the internal connection of USBi Drives. The USB0 (X4) terminal is for the direct connection of a USBi drive inside the operator itnerface. At the USB2 (X6) terminal, an optional "VB-USB_Plug-1" cable can be connected, thus moving the Ex-i USB connection to the outside of the operator interface. The cable has a USB-A connector for the USBi drive, making it accessible from the outside.

 

 

ET/MT-xx6, ET/MT-xx6-Fx-...,  ET/MT-xx6-Tx-... and ETMT-xx6-A-...

X6

1

VCC

USB2 Ex-i

2

USB -

3

USB +

4

GND

5

GND not Rev. 1 devices

 

Terminal

USB2 (X6)

 

USB-Plug

 

X6_PinningRev2_en

 

The maximum joint power supply of USB0 (X4) and USB2 (X6) is 500mA.

 

 

<< back