ET/MT-xx6-A-Fx/Tx-... rev. 3

Vorheriges Oben Nächstes Helps selection copy topic address english version

HMIs, human machine interfacesEagle ET/MT-3x6...Connection overview ET/MT-xx6...ET/MT-xx6-A-Fx/Tx-... rev. 3

 

Click to expand or collaps object.Figure, Hardware revision from 3.0.2 Nutzen Sie die Maus für weitere Informationen.

ET_xx6_BackCaseView

 

The status of the respective LEDs at the operator interfaces indicates the activity of the corresponding data lines.

These LEDs are located underneath the additional back lid that covers the interface circuit board. This additional back lid needs to be removed in order to see these LEDs.

 

Warnhinweis

In hazardous areas the operator interface must not be operated without its enclosure lid and back lid.

 

This means that the status LEDs can only be viewed during commissioning or in a safe area !

 

Designation

Colour

Name

Description

D5

green

COM1 TxD

Activity on COM1: sending, LED flashing

D8

yellow

COM1 RxD

Activity on COM1: receiving, LED flashing

D7

green

COM2 TxD

Activity on COM2: sending, LED flashing

D6

yellow

COM2 RxD

Activity on COM2: receiving, LED flashing

D14

yellow

LINK ACT

Ethernet link established, LED always on

Activity on Ethernet link, LED flashing

D15

green

HD

Access to system disk (Solid State, HDD), LED flashing (only for ET-4x6-A devices)

 

 

Kapitelseite Overview X1-X7

Kapitelseite Overview X8-X22

 

Click to expand or collaps object.Figure, Hardware revision to 3.0.1 Nutzen Sie die Maus für weitere Informationen.

Anschlussraum-HWRev3-LWL-SC_COM2_V2

 

The status of the respective LEDs at the operator interfaces indicates the activity of the corresponding data lines.

 

Warnhinweis

In hazardous areas the operator interface must not be operated without its enclosure lid and back lid.

 

This means that the status LEDs can only be viewed during commissioning or in a safe area !

 

Kapitelseite Overview X1-X7

Kapitelseite Overview X8-X11

 

 

 

<< back