In order to operate the NETLink® PRO Compact with one of the ET/MT-3x6 Eagles or the ET/MT4x6 Panel PCs, the following settings are required:
•IP address and subnet mask
In its factory state, the adapter has the IP address 192.168.4.49.
The IP address can be adjusted to your own network via the
embedded web server and a browser, or
the Helmholz Tool „NetLink PRO Family Configuration“.
Calling up the web server via a web browser
Call up the "Basic Configuration“ register. This section is password-protected.
NETLink PRO Compact
Adjust the TCI/IP parameters to match those of the connected network.
Accept the settings with "Submit" and save with "Store" in the NETLink® PRO Compact.
"NetLink PRO Family Configuration"
Start this tool from the CD.
All NEtLink Pro Compact Gateways in the network will be recognised automatically.
Calling up the parameter screen and adjusting the IP address settings via "Parameterisation...".
Accept the settings with "Accept" and store them in NETLink® PRO Compact with "Save in NetLink.