1500er

Ethernet to S7:

S7-1500

CP 1543-1

Network

Switch Switch

HMI

Fgr_EthrTx2x8_To_PLC_1500

RJ-45

1) Typical direct connection to PLC

2) Connection via one or two switches of a network

Ethernet

Terminals

See also:

Configuration of Ethernet port in SPSPlusWIN:

•Open dialogue: Project explorer > Interfaces > TCP/IP channel 1 (2, 3, 4)

Dlg_EthrnConfgForS7

•Close dialogue "OK".

•In "Totally Integrated Automation Portal" klick ' online > accessible participants '.

•Window shows information on rack and slot number.

•Open dialogue: Project explorer > Interfaces > right mouse click TCP/IP channel 1 (2, 3, 4) >"Properties".

Dlg_PropertiesTCP_IPChannel

•Determine (station IP address / station no. slot rack).

•Close dialogue "OK".

Konfiguration der S7 für SPSPlusWin:

	Configuration parameters in "Totally Integrated Automation Portal":
	Dialog / Mask
	PLC_1 > Programm blocks > DBx[DBx] > Static > STAOxy > General
Parameter:	Value	Note / Information
Optimized block access	Unselected (unchecked)	HMI requires absolute addressing

	Configuration parameters in "Totally Integrated Automation Portal":
	Dialog / Mask
	Devices > S71500 > PLC_1 > Deviceconfiguration > Properties > Protection > Connection mechanimus
Parameter:	Value	Note / Information
Permit access with Put/Get communication from remote partner (PLC, HMI, OPC)	Unselected (unchecked)

S7 Configuration on Detail / Adress, Rack, Slot - Informations: