Assembly description

Vorheriges Oben Nächstes Helps selection copy topic address english version

AccessoriesReadersIDM160AssemblyAssembly description

 

Assembly the flange socket for connecting the hand-held scanner or the base station:

 

ET-208, ET-/MT-xx6

or

ET-/MT-xx7

ReaderBox

Fgr_IDM160_prinzipal_connection_to_HMI

*1

Radio scanner

+

Base station

 

 

or

 

 

2*

Hand scanner

 

 

 

 

1.Install the ReaderBox at an appropriate point in the (field housing). Do this, select a position which utilizes the existing cable lengths of ReaderBox optimal..

 

Warnhinweis

Warning

Explosion hazard: Additional holes compromise the effectiveness of the explosion protection !

Only use the existing mounting holes.

Use a suitable mounting plate to attach a DIN rail, for example.

 

2.Select the flange a position which is optimized for the application of the hand scanner and can be reached by the cable X3 ReaderBox.

3.Attach the selected position the 3 holes according to the following drawing.

 

CutOut_Binder_Flanschdose_RD24

Maße in mm.

 

Mounting holes:

Screw

recommended hole

M3

=> 3.2mm

Tapping screw 2.9 mm

=> 2.30 mm for A4 steels => 2.40mm

 

4.Mount the flanged with 2 screws of appropriate diameter to the (field housing). Use this to ensure the appropriate gasket to the tightness of the opening of flange.

 

Continue with:

Kapitelseite X3 Connection to the flange

 

Base station of the radio scanner:

Pct_BaseStation

 

Click to expand or collaps information.  Assembly the base station of the radio scanner

 

1:1 drilling template

TDM160_BasisStationDrills1_en

Pct_CableBreakOut_BaseStn

 

Mounting holes:

Screw

recommended hole

M4

=> 4.5mm

Blechschraube 4,2mm

=> 3.20mm for A4 steels => 3.40mm

 

1.Mount the base station with 3 screws (M4x30 mm 1x, 2x M4x40 mm).

2.Insert the plug of the connection cable to the base station into the previously mounted flange and tighten the union nut of the connector finger-tight.

 

See also:

Kapitelseite Assembly

 

 

<< back