Zerlegung der Kupplung

Vorheriges Oben Nächstes Helps selection copy topic address english version

HMIs, human machine interfacesEagle ET/MT-3x6...AssemblyCoupling assemblyInstallation step 4

 

Materials

Separation of the coupling

Preparation of the coupling

Mounting the coupling


Installation step 1

Installation step 2

Installation step 3

Installation step 4


 

Lubricate the O-ring seal and place it into the outer groove of the coupling. Then screw the four M6x12 hexagon sockets into the corresponding holes so that they hold but are not screwed too tight.

 

Pct_TopScrewMounted

 

The coupling is now fully assembled. You can now mount the operator interface plus enclosure onto the stand.

 

 

 

 

<< back