Assembly Stationary Unit

Vorheriges Oben Nächstes Helps selection copy topic address english version

HMIs, human machine interfacesKVM-Systems, ET/MT-6x8...Assembly ET- / MT - 6x8 DevicesAssembly Stationary Unit

 

The following details must be taken into account when mounting the device:

Place the unit on level ground that is not moving.

Take particular care that parts of the surface will not move up or down due to the movements of people working in the vicinity.

Mount the device in an area where normally there are no people or moving machine parts.

Lay the cables in an area where normally there are no people or moving machine parts.

Make sure you do not go below the permitted bending radius of the cables.

Make sure the device is firmly placed and does not rock backwards and forwards.

If necessary fix the device in a suitable way to prevent it from toppling over.

 

 

15" device

21" device

Fgr_438_StandUpUnit

Fgr_4-x98_StandUpUnit

 

Hinweis

Make sure you read the notes in chapter Installation space!

 

 

 

 

<< back